Cleaning Chemicals for Concrete Floors

No matter where you are your concrete takes a lot of abuse, including concrete pavements, parking lots and driveways. Oil, rust, graffiti and heavy foot traffic are common forms of abuse these foundations endure on a regular basis. Imagine spending your valuable time and money on renovations and home improvement and the end result still eventually end up stained. Xtreme Polishing Systems supplies a purposeful selection of concrete cleaning chemicals designed for these floor maintenance issues.

It’s extremely important to understand the extended variety of concrete cleaning chemicals that are specifically designed to remove contamination and available for you to use, because ultimately obtaining this useful knowledge will save you a lot of time, money and effort.

Types of Cleaners

  • Alkaline CleanersAlkaline degreaser have a very high efficiency in removing grease and oil from the affected area. These chemical cleaning products emulsify the oil, and with the help of hot water, it helps completely flush the oil away from the surface. These concrete degreasers are most often used to eradicate hydrocarbon based stains, grease and oil stains in concrete.  Alkaline cleaners typically come as concentrates and are diluted with water. Agitation or scrubbing is critical for the surface to completely absorb the chemical cleaner, and ultimately deliver maximized results. Apply the concrete cleaner at full strength when dealing with older or deeper or stains, and dilute the concrete cleaner for newer, less stubborn stains that haven’t penetrated the surface as seriously. Allow enough time for the chemical cleaner to fully absorb into the stained areas.
  • Acidic Cleaners – Stains, dirt, and contamination are soluble in an acidic solution. They are especially effective for removing efflorescence from concrete. Acids contain an active ingredient in which provides a ready-to-use, concentrated formula. They neutralize the concrete surface and can later be washed with water. After the application, apply scrubbing to ensure removing any stubborn stains.
  • PH-Neutral Cleaners – designed for removing stains from interior sealed concrete surfaces. They are typically concentrates that have to be diluted with water, depending on the level of cleaning required, or it can be saturated per the requirement, followed by scrubbing or light agitation. It can also be rinsed easily by water.
  • Enzymatic/Bacterial Cleaners – These are the newest types of concrete cleaners which use organic chemistry and active enzymes to attack, break down, and in some cases digest stains and contamination. These cleaners do not require water for activation, and therefore most of the times there is no residue left to wash away.

Resources, Guidance and Support

Xtreme Polishing Systems supplies the industry with innovative and professional concrete polishing productsequipment, chemicals and much more. Our professionals are trained to deliver the guidance, customer service and reliable products that are fundamental when preparing and executing a concrete floor. Whether you’re a new business owner, flooring subcontractor, DIYer, craftsmen, artist, existing business or homeowner, our exquisite product selection and extensive industry experience will assist you every step of the way, from start to finish.

The experts at Xtreme Polishing Systems understand that concrete can variate in properties depending on each situation and thus have to be treated differently. We’re here to guide you in the proper direction, so feel free to call us at (877) 958-5732 with any questions about ‘Cleaning Chemicals for Concrete Floors’ or visit our website www.xtremepolishingsystems.com and browse our products today!

Advertisements

Concrete Densifiers/ Chemical Floor Hardeners

Chemical floor densifiers/ hardeners are a ready to use, non-metallic, floor and surface hardeners based on organic and natural aggregates. It provides wear resistance to concrete surfaces, extending the service life for industrial, commercial and residential settings. The floors are rendered tough, wear resistant, dust free, physiologically harmless and above all durable with ease of maintenance. It provides the best scratch resistant protection to your concrete surface and is suitable for a variety of floors including warehouses, hangers, etc.

Concrete densifier/ hardener is a unique combination of selected cementitious binders modified by polymers (to impart the mix plasticity and high strength) blended with well-graded, natural hard aggregates. The grading is most critical and ensures maximum possible surface density for old or new concrete floors. The bond is absolutely incredible with its increased wear and impact resistance.

Advantages

  1. One of the greatest advantages of chemical floor hardeners are able to withstand almost all types of mechanical stresses such as rolling, sliding, percussion, impact, abrasion etc.
  2. Chemical floor hardeners are non-dusting, non-slip and anti skid even in cases of spillages. It’s also waterproof and provides high floor density, while requiring only minimum maintenance.
  3. Suitable for interior and exterior applications. Chemical floor hardeners are extremely economical flooring alternatives for homeowners or businesses that can’t afford pricy marble or granite floors but want the same brilliant, mirror-like finish.

Resources, Guidance and Support

Xtreme Polishing Systems supplies the industry with innovative and professional concrete polishing productsequipment, chemicals and much more. Our professionals are trained to deliver the guidance, customer service and reliable products that are fundamental when preparing and executing a concrete floor. Whether you’re a new business owner, flooring subcontractor, DIYer, craftsmen, artist, existing business or homeowner, our exquisite product selection and extensive industry experience will assist you every step of the way, from start to finish.

The experts at Xtreme Polishing Systems understand that concrete can variate in properties depending on each situation and thus have to be treated differently. We’re here to guide you in the proper direction, so feel free to call us at (877) 958-5732 with any questions about ‘Concrete Densifiers/ Chemical Hardeners’ or visit our website www.xtremepolishingsystems.com and browse our products today!

How To Clean Your Concrete Floors

Are you unsatisfied with the finish of your concrete floors? Are you wondering how to clean concrete floors, slabs or your countertops? Whether it be your patios, sidewalks, driveways or other floors, our professionals have the knowledge, experience and reliable products to bring your concrete floors back to life safely and naturally!

Concrete floors get dirty very easily, although they take up dirt very gradually, they need to be cleaned at regular intervals. Overtime, they collect a lot of grime from dirty, oily cars parked in driveways, heavy foot traffic, spilled grease, etc. Cleaning them periodically will help assist in their everlasting beauty and their extended life.

  1. First and foremost you must determine which tools and cleaners will be best suited for cleaning your particular type of concrete flooring. This is because different concrete needs a different cleaning procedures.
  2. Next, they prepare the area by sweeping loose debris off the floors by using a push broom and/or later dust mop (a soft cotton one). A vacuum could also be used to extract dust and debris from any driveways. A canvas cloth can be put on any plants or other ornament-like things laying around to avoid any permanent damages due to sprays.
  3. For indoors concrete such as an enclosed patio or garage, a mild cleaner is preferred. A mix of good old oxygen bleach in approximately five gallons of warm water is used. The solution is sprayed thoroughly over every section. It is required to wait for almost twenty minutes to let the bleach do its thing.
  4. The dirt that was actually beneath the layers is mopped with scrub or patio broom whilst rinsing and wringing the broom/ mop after every few minutes. The dirt is washed away with clean warm water to rinse any residue.
  5. Using concrete cleaning chemicals such as rejuvenating cleaners, stain protectors, and lithium densifiers cleans the concrete vigorously. To clean driveways of fresh motor oil spots, an old fashioned litter is spread over it and left overnight, the following morning the floors are swept off and rinsed thoroughly. A variety of commercial chemicals and solutions such as TSP and muriatic acid are used for getting rid of different types of stains.

Resources, Guidance and Support

Xtreme Polishing Systems supplies the industry with innovative and professional concrete polishing productsequipmentchemicals and much more. Our professionals are trained to deliver the guidance, customer service and reliable products that are fundamental when preparing and executing a concrete floor. Whether you’re a new business ownerflooring subcontractor, DIYer, craftsmen, artist, existing business or homeowner, our exquisite product selection and extensive industry experience will assist you every step of the way, from start to finish.

The experts at Xtreme Polishing Systems understand that concrete can variate in properties depending on each situation and thus have to be treated differently. We’re here to guide you in the proper direction, so feel free to call us at (877) 958-5732 with any questions about ‘How To Clean Your Concrete Floors’ or visit our website www.xtremepolishingsystems.com and browse our products today!

Understanding the A to Z of Chemical Floor Hardeners

What are Chemical Floor Hardeners?

Chemical floor hardeners are used to chemically seal and harden concrete floors. These chemical hardeners act as a protective sealant to withstand great impact and strengthen the flooring substrate permanently. Floor hardener applications are specially ideal inside industrial plants, warehouses, storage silos, sewage plants, chemical processing facilities, refineries, and heavy pedestrian floor traffic areas, such as civic centers, sports arenas, stadiums, hospitals, airports, and museums.

These chemical floor hardeners are formulated out of chemical reactive products which help in hardening the concrete surfaces, compared to untreated concrete. The chemical hardeners are ready to use, liquid-based and comes with easy to follow instructions. Chemical Floor Hardeners penetrate the concrete surface, filling any holes on the surface. This process produces a considerably thicker, reliable floor with enhanced durability.

Advantages

  • High Gloss Appearance
  • Longer Life Expectancy
  • Prevents moisture and other foreign matter.
  • Abrasion resistance and dust proof
  • Protects against scratching or peeling.
  • Improves light reflectivity.
  • Ready to use from container and easy to apply.
  • VOC compliant.

Safety Hazards

Chemical floor hardeners are non-combustible products, however if you come in direct contact with the chemical it may result in irritation in eyes or on the skin. It is extremely imperative to ALWAYS wear safety gear while working with any concrete chemical.

Resources, Guidance and Support

Xtreme Polishing Systems supplies the industry with innovative and professional concrete polishing productsequipmentchemicals and much more. Our professionals are trained to deliver the guidance, customer service and reliable products that are fundamental when preparing and executing a concrete floor. Whether you’re a new business ownerflooring subcontractor, DIYer, craftsmen, artist, existing business or homeowner, our exquisite product selection and extensive industry experience will assist you every step of the way, from start to finish.

The experts at Xtreme Polishing Systems understand that concrete can variate in properties depending on each situation and thus have to be treated differently. We’re here to guide you in the proper direction, so feel free to call us at (877) 958-5732 with any questions about ‘Understanding the A to Z of Chemical Floor Hardeners’ or visit our website www.xtremepolishingsystems.com and browse our products today!

Concrete Cleaning Floor Maintenance

Concrete Cleaning Floor Maintenance

You are done with the traditional concrete cleaning formulas, which are taking a lot of time and effort in scrubbing off the stains and rigid grime and grease. Xtremepolishingsystems.com stocks a wide range of specific concrete cleaning chemical that you need to keep your flooring neat and sparkling clean.

Xtremepolishingsystems.com offers a wide range of cleaners which are aimed to remove and clean the impurities from the concrete surface. Depending on the type of the flooring there has been designed a perfect one for the flooring. It is important to know their working uniqueness and how they will help you to give out the cleanest floorings.

Some of the preferred concrete cleaning chemical liquids are listed below:

Acidic concrete chemical cleaners

This chemical cleaner is specifically designed to clean the rigid stain marks, contamination and dirt thoroughly and not to forget in minimum of effort. The insoluble metallic salt, and efflorescence on the concrete flooring that you see can be easily removed through this cleaner.

Acid based concrete chemical cleaners are widely available at concrete distribution outlets and you can also find them online at xtremepolishingsystems.com. The chemical cleaner is available in both ready to use and concentrated form.

PH-neutral concrete chemical cleaners

These are the milder ones, majorly designed for interior sealed concrete. Since, these are the milder cleaning liquids they do take care of the contamination and the dirt and grease accumulated on the concrete surface. However; they are not good to remove the tough stains, grease and dirt present on the surface, so be careful when you are picking one.

Alkaline concrete chemical cleaners

Widely known as concrete degreasers, they are best when you are searching a chemical cleaner which removes grease, hydrocarbon based stains and oils from the flooring. These chemical cleaners require to be diluted with the water before using them. Depending on how aggressive your stain is, you need to apply as per the direction suggested. At xtremepolishingssystems.com; you will find range of alkaline concrete chemical cleaners suiting your floor cleaning requirements.

Bacterial concrete chemical cleaners

Exactly, like the name suggest, the concrete chemical cleaners work on the fungal issues that your concrete is experiencing. Also known as oxidant cleaners, they are specifically designed to remove starch based stains, soil stains, protein based stains and similar ones. These chemical cleaners are genetically engineered with bacteria which in real work on dirt and grease issues.

Apart from the above mentioned there are specialty concrete chemical cleaners which require diluting with 2 or more chemical cleaners. These are the severe ones and should be carefully used as per the instructions. Also while using any chemical based cleaner on your concrete flooring it is important to wear safety gears like gloves, and cover your eyes to avoid getting the fume in the eyes.

About Xtremepolishingsystems.com

Xtremepolishingsystems.com is a leading retail and rental supplier for the construction’s finest surface preparations, concrete chemical cleaners, polishing tools, and so on. Consider buying your flooring related requirements from xtremepolishingsystems.com to enhance the artistic charm of your space. Browsing the website, you’d find lots of floor polishing styling options as well as other tools and machineries which are completely offered at less cost as well as you can rent them as per your requirements. For more details visit www.xtremepolishingsystems.com.

Our professionals at Xtreme Polishing Systems are readily available to answer any questions or assist with your inquiries, so please feel free to contact us at (877) 958-5732 or visit our website www.xtremepolishingsystems.com and shop today!

Understanding the A- Z of Chemical Floor Hardeners

Chemical floor hardeners are commonly used to chemically seal and harden the concrete floorings. These chemical products act as a sealant hydrating to make a great impact and strengthen the flooring permanently.

Irrespective the chemical floor hardeners variations to choose from, it’s vital to understand the benefits and features they come associated with, such as reduced dusting, higher gloss impression, and a longer life expectancy of the concrete floor. Initially, people were skeptical when it comes to using densifiers. After all, how can a liquid sealant with an appearance of water change the properties of concrete?

Understanding The Basics Of Chemical Floor Hardeners

These chemical floor hardeners are formulated out of chemical reactive products which help in hardening the concrete surface. The hardeners are ready to use for one can use directly in his/her DIY projects. These are liquid based and comes with easy to use instructions.

This aquatic solution, when properly applied, providesconsiderable improvement in scuff and chemical resistance and will suggestively improve the durability of the concrete surface when compared to untreated concrete.

These hardeners are applied and enter into the concrete surface, where a chemical reaction takes place;this produces a by-product that fills the holes of the flooring surface. This process produces a considerablythicker concrete surface with enhanced its durability. Additionally; the densifying and hardening action, it also hardens the concrete surface along with eliminating dusting and pitting.

Uses of Chemical Floor Hardeners

Chemical floor hardeners from Xtreme Polishing Systems are highly recommended for using to hardened, dustproofed, and improved chemical- and abrasion-resistant surfaces. Ideal applications include floorings in industrial plants and warehouses, storage silos, sewage plants, chemical processing facilities, refineries, and heavy pedestrian floor traffic areas, such as civic centers, sports arenas, stadiums, hospitals, airports, and museums. These hardeners can be successfully be used in combination with shake-on hardeners as well.

Benefits of Chemical Floor Hardeners

  • Penetrates deeply into concrete to densify and harden surfaces to help prevent entry of moisture and other foreign matter.
  • The flooring becomes abrasion resistance and dust proof when treated with these floor hardeners
  • Provides a permanent, attractive sheen with the ability to polish.
  • Protects against scratching or peeling.
  • Provides tough, protected surface that won’t after-yellow, discolor, or show pedestrian or vehicular traffic wear marks.
  • Improves light reflectance.
  • Ready to use from container and easy to apply.
  • VOC compliant.

Applying Process

Xtremepolishingsystems.com guides on for your DIY projects. With a step by step process on how to apply on the fresh concrete to till the final troweling; it ensures that you are directedmethodically for the application process.

Get rid of all residues, curing compounds, oils, sealers, contaminants, and laitance before applying the chemical floor hardener; the flooring you are applying to is thoroughly cleaned and well-built. Ensure that you repair and fill all the pores, cracks and weakened areas.

For top results you can apply it on fresh, newly placed concrete, or instantly after the final finishing processes have been done.

Safety Hazards

Chemical floor hardeners are non-combustible product.Person at times working can come in direct contact which might result in severe irritation in eyes and skin hence it is imperative to wear safety gears while working in such hazardous environment.

Our professionals at Xtreme Polishing Systems are readily available to answer any questions or assist with your inquiries, so please feel free to contact us at (877) 958-5732 or visit our website www.xtremepolishingsystems.com and shop today!

Understanding The Science Of Working With Floor Hardeners

Understanding The Science Of Working With Floor Hardeners

Floorings are hard, but not always hard; with the time the cracks starts to appear and often starts to wear out before time. To increase their longevity; floor hardeners are used. It acts like a concealer that ensures the flooring doesn’t get damaged for a longer time.

What’s the theory of using Xtreme Polishing Systems floor hardeners?

Usually, these floor hardeners work like this:

The usual flooring contains calcium carbonate, lime which plays an important role in strengthening and making it durable. However; the chemical reactions don’t reach every last bit of the cement.

With the growing trend within the concrete flooring industry is to apply the floor hardeners on freshly-troweled concrete in what is referred to as a pre-seal. Professionals/workmen specialized in flooring treatment advises to apply hardeners within 28 days of time after the concrete surface has laid out which gives maximum performance.

Professionals at Xtreme Polishing Systems recommends 28 days based on their strong understanding of the chemistry behind floor hardeners and the means by which they densify concrete surfaces.

Now the theory

Day 1 to Day 28

On day 1 the hardeners have less or no time to hydrate within the concrete slab as it the concrete flooring still has calcium hydroxide which takes time to react with the hardener. Also, the presence of water prevents floor hardeners to enter deep into concrete.

The hardener by this time is not able to enter concrete apertures and with the constrained expanses of calcium hydroxide to react with, it remains on the concrete’s surface and reacts with the air to form unusable, salts.

Day 28

Conversely, after 28 days of hydration, pores and capillaries are theoretically free of excess mix water and calcium hydroxide is abundant. Hardener has way to penetrate into the capillaries’ and pores beyond the concrete surface, and reacting it with the calcium hydroxide during the course of the slab which generates calcium silicate hydrate gels.

The performance of floor hardeners are limited when concrete to be treated lack a sufficient amount of calcium hydroxide, or when it is unable to penetrate due to the surface being saturated with water.

Testing Is Done

For testing the concrete flooring whether the hardeners have worked or not; 2 abrasive wheels are moved onto the surface. Scratches and scruffiness is measured by the amount of ground up concrete removed from the surface. Concrete dust, debris is then collected from the specimen and evaluated on an analytical balance. The more concrete debris removed and collected, the more heavily scuffed the surface.

Conclusion

Floor hardeners play an important role which one should not overlook. Taking in its significance and with the industry demands, which not only takes care of the foot traffic demands but ensure that one doesn’t have to undergo costly flooring replacing treatments. Also; engage yourself with basic understandings of these hardeners as they are available in variety serving different purposes.

These are not easy DIY projects; hence xtremepolishingsystem.com offers a very detailed understanding of using one. It is also consults on various professional flooring services; it is advisable to get suggestions and guidance from experienced professionals especially when you are dealing with an expensive project.

Our professionals at Xtreme Polishing Systems are readily available to answer any questions or assist with your inquiries, so please feel free to contact us at (877) 958-5732 or visit our website www.xtremepolishingsystems.com and shop today!