How To Acid Stain A Concrete Floor

The acid staining floor process, or often referred to as ‘colored concrete’, is one of the most popular applications to add dramatic and beautiful effects to a concrete floor. The application can be viewed as an ideal alternative to carpeted or tiled floors, as it gives a depth of color to the floor by combining different colors and techniques. It results in uneven coloration of the concrete floors creating different, natural looking patterns.

Taking Precautionary Measures:

Before starting the acid staining process on the floors, we remove all the baseboard and trim work to avoid damage. The wall and the exposed lower cabinets are covered with at least 12 inch masking paper.

Preparing The Concrete Surface:

Floors need to be washed with water to confirm that they are not sealed. Grease and oil spots are removed by using sandpaper/floor sanders, floor grinders or chemical strippers. Our experts will usually tend to avoid any uneven coloration or imperfections as they may subtract from the exclusive finish of the floor.

Mixing The Acid Stain:

Acid stains are the blend of water, acid-soluble metallic salts and hydrochloric acid (the main ingredient). All the compounds penetrate into the surface and react with calcium hydroxide in the concrete to produce distinctive patterns and finish.

Applying The Acid Stains:

Next, we apply the stains using pump sprayers. The spray wand is kept almost 18 inches above the ground and is used in random patterns to spread evenly across the floor. It is made sure that no puddles are generated. At least, two coats of acid sprays are applied; the second coat is applied after a gap of about an hour to let the floors dry completely after the first coat. The subsequent coats are applied until the desired color is reached.

Neutralizing The Acid Stains:

A mixture of water and ammonia in proportion of 4:1 is applied to neutralize the hydrochloric acid stains. We make sure to thoroughly clean the floors using water to further ensure that no acidic residue is left. The extra water is vacuumed at the end and floors are left overnight to dry.

Sealing The Floors:

The next step involves using solvent based acrylic sealer to seal the stained floors as it penetrates into the concrete. The floors are sealed to avoid everyday wear and tear and air bubbling as well as to improve the color of the stain effects. Using pump sprayers to seal the floors helps guarantee the achievement of a nice consistent finish. This step (again) requires two coats: first with approximately 15% solid acrylic and second with 20-25% solid acrylic.

Resources, Guidance and Support

Xtreme Polishing Systems supplies the industry with innovative and professional concrete polishing productsequipmentchemicals and much more. Our professionals are trained to deliver the guidance, customer service and reliable products that are fundamental when preparing and executing a concrete floor. Whether you’re a new business ownerflooring subcontractor, DIYer, craftsmen, artist, existing business or homeowner, our exquisite product selection and extensive industry experience will assist you every step of the way, from start to finish.

The experts at Xtreme Polishing Systems understand that concrete can variate in properties depending on each situation and thus have to be treated differently. We’re here to guide you in the proper direction, so feel free to call us at (877) 958-5732 with any questions about ‘How To Acid Stain A Concrete Floor’ or visit our website www.xtremepolishingsystems.com and browse our products today!

Advertisements
The Magnificence of Concrete Dye

The Magnificence of Concrete Dye

One of the current forms in which cement is being used is cement dye. Cement dye is the coloured form of cement and has found many uses in the real world.

How can one colour cement?

There are primarily two ways of colouring cement. One is by using dry pigment which is swept across the surface of concrete which has been freshly prepared. The other one is by using powder or liquid pigments which are then poured into the wet concrete before it is being poured.

Surface Colouring

Step 1: Sprinkle on the Powder

While the concrete is curing, cover the area with an even coat of the coloured powder. Avoid clumping the powder since it can become difficult to clean afterward. If the area is small enough, you can apply the powder by hand. Be sure to wear gloves if this is your preferred application method. For larger areas, one can use a style bar spreader.

Step 2: Broom Finish the Concrete

The ubiquitous broom plays an important role out here. Use the broom to sweep the surface evenly. This is done to make sure that the powder has covered the surface evenly. On areas too thinly covered, apply more powder.

Step 3: Let the Powder Set

The first application of powder should remain on the concrete’s surface until internal water absorbs the pigment. This will almost take 24 hours.

Step 4: Rinse

Remove excess powder by thoroughly rinsing the concrete.

Step 5: Apply Finish

A sealant or finish is applied to the first application of the pigmented powder. You’ll want to be cautious while you apply the finish, gently so that it does not break through to the gray-colored concrete. The manufacturer instructs to dry the sealant.

Step 6: Repeat Process

For a more vibrant look, apply the remaining amount of pigment to the concrete and repeat the entire process.

One of the most important aspects of collaring cement is to keep the water ratio consistent throughout. It is the water to cement ratio that keeps the colour constant. Controlling the amount of water hence becomes an imperative task and needs to be factored in while colouring cement. However, one must also be aware of a few conditions: Like if the surface is drying out, or the weather is hot and windy, it is advisable not to use water.

Instead, use a surface evaporative control agent.