How To Grind Concrete Surfaces

Are you looking for solutions on ‘How To Grind Concrete Surfaces’Xtreme Polishing Systems provides fast solutions for smoothing out irregularities in concrete surfaces. With more than 30 years experience, our professionals at Xtreme Polishing Systems are available to assist you in getting rid of old, dusty looking floors and refinishing them into a beautiful surface. Using a variety of powerful concrete floor grinders that grind down the concrete, removing bumps, graffiti, worn coatings, etc. you can ultimately achieve any desired level of shine.

Surface Preparation 

We begin by examining the concrete surface for any holes or cracks that need to be patched. The holes are filled with concrete patch compounds at least twenty-four to forty eight hours before grinding the concrete.

Grinding Methods: Wet and Dry

There are two types of grinding methods: wet grinding and dry grinding. When dry grinding, a vacuum is used to extract the dust from the floor, while wet grinding implements water in the process and the magnetic discs rotate grinding the floor. The wet grinding process typically results in more of a mess but reduces the friction. We typically use the dry grinding method first and then finish with the wet grinding method to provide a high sheen to the floors.

Equipment & Tooling: Concrete Floor Grinders & Diamond Abrasives

Concrete floor grinders are used for grinding the concrete and are fitted with different diamond grit abrasives. The grit level is increased the coarser they are (30, 50 and 80 grit discs to the finer 100, 400 and 800 grit discs). The grit level can be increased up to 3000 grit discs for providing ultra-swank luster to concrete.

The procedure is started with coarser grits to get rid of small holes or lighter stains and then is carried upon with finer grits for more smoothing. The coarser grit is made up to three or four rounds for making the concrete ready for fine polishing. The finer grits will result in ultra smooth and polished concrete surfaces.

To prevent the floors from attracting dust and becoming rough again, high quality concrete hardeners are applied to the surfaces. For grinding new concrete surfaces, we may wait about less than a month to let it dry completely and cure properly.

Resources, Guidance and Support

Xtreme Polishing Systems supplies the industry with innovative and professional concrete polishing productsequipment, chemicals and much more. Our professionals are trained to deliver the guidance, customer service and reliable products that are fundamental when preparing and executing a concrete floor. Whether you’re a new business owner, flooring subcontractor, DIYer, craftsmen, artist, existing business or homeowner, our exquisite product selection and extensive industry experience will assist you every step of the way, from start to finish.

The experts at Xtreme Polishing Systems understand that concrete can variate in properties depending on each situation and thus have to be treated differently. We’re here to guide you in the proper direction, so feel free to call us at (877) 958-5732 with any questions about ‘How To Grind Concrete Surfaces’ or visit our website www.xtremepolishingsystems.com and browse our products today!

Advertisements

Dust Shrouds for Floor Grinders

A dust shroud is a system used to control dust at the point of origin with the help of grinding. These shrouds can be fitted to most popular brands of hand held angle grinders. When these shrouds are fitted to popular brands of hand held angle grinder it becomes a piece of equipment that fits onto the gear housing bearing box of an angle grinder. A vacuum system is attached which helps in extracting the dust while grinding.

Types of Shroud: 4″, 5″ & 7″ Dust Buddie

The Dust Buddie is the pro contractor’s choice for dust control, especially when using a hand grinder for decorative concrete. This device is used for crack chasing, tuck pointing and cutting. It is made of durable polycarbonate, which provides contractors with the durability they need to hold up in the most extreme working environments. It is a clear shroud so it provides contractors with the visibility they need for optimal control. The cutting depth guide is easy to adjust and essential when performing high quality work. It fits most hand grinders, including Dewalt, Hitachi, Bosch, and more. The Dust Buddie captures up to 99% of the dust created by a hand grinder and is designed to make grinding easier and more manageable. It rides on a spring cushion, keeping the grinder flat so that dust won’t escape and a short brush skirt improves lateral motion for grinding on uneven or textured surfaces. It is made of durable, clear polycarbonate for visibility.

7″ & 9″ Polymer Shroud

The 7″ (180mm) custom designed polymer dust shroud attaches to most dry vacuum units for dust extraction when sanding wood, plasterboard, grinding concrete and other types of dust. The adjustable collar and screw attachment allows it to be fitted to different diamond cup grinder heights. They come with a wide variety of neck clamp sizes to suit brands of 180mm (7″ or 9″) hand held angle grinders. These are designed to work with variable speed polishing machines which are used in concrete floor polishing corners, stairs, and other hard to reach areas like benchtops.

5″ Polymer Shroud

The 5″ (125mm) custom designed polymer dust shroud is designed to attach to most dry vacuum units for dust extraction when grinding concrete, sanding wood and plaster board and other types of dust. The adjustable collar and screw attachment allows it to be fitted to different diamond cup grinder heights and comes with a range of neck clamp sizes to suit most major brands of 125mm (5″) hand held angle grinders.

Designed to also work with variable speed polishing machines used in concrete floor polishing, benchtops, and stairs and hard to reach areas.

5″ Corner Hood

The Australian made Corner Hood fits most 5″ angle grinders. It is strongly constructed and has a removable edging cover to get right into the corner. No other shroud has the same combination of features including the very simple mounting collar inserts. The reason it does not rap or twist in the sun as it is made of hard steel. With a seal that allows airflow from under where the dust is generated, it gives superior dust pick up.

7″ & 9″ Hover Hood

The Hover Hood is also an Australian made dust shroud that fits most 7″ or 9″ angle grinders. Removable edging cover allows you to get right up the edges and with strong constructions of the wall. It features simple mounting collar system which comes with exact-fitting inserts for each concrete grinder brand that locks on tightly to the angle grinder with no movement. Also built from steel making it not to warp or twist in sun. The air flows under the seal where the dust is generated giving it powerful dust suction.

Resources, Guidance and Support

Xtreme Polishing Systems supplies the industry with innovative and professional concrete polishing productsequipmentchemicals and much more. Our professionals are trained to deliver the guidance, customer service and reliable products that are fundamental when preparing and executing a concrete floor. Whether you’re a new business ownerflooring subcontractor, DIYer, craftsmen, artist, existing business or homeowner, our exquisite product selection and extensive industry experience will assist you every step of the way, from start to finish.

The experts at Xtreme Polishing Systems understand that concrete can variate in properties depending on each situation and thus have to be treated differently. We’re here to guide you in the proper direction, so feel free to call us at (877) 958-5732 with any questions about ‘Dust Shrouds for Floor Grinders’ or visit our website www.xtremepolishingsystems.com and browse our products today!

The Most Versatile Tool For Various Metal & Concrete Work – Hand Angle Grinders

The Most Versatile Tool For Various Metal & Concrete Work – Hand Angle Grinders

Ask any of the building contractors, motor mechanics or DIY enthusiastic hand angle grinders are the most used and loved tool that they can’t do without. If your work is majorly depending on grinding, cutting and polishing these grinders are often considered as the best tool for the job.

Hand handled angle grinders are majorly used for metal fabrication and welding use which are to be used under safety instructions.

Right Tool For The Job

You may be looking for the right hand handled angle grinders for a particular job; as these devices offers wide variety of the jobs hence not just the grinders you shall have to look for relevant disc especially when you have concrete cutting work to do. It is important to have good understanding of what kind of grinder you are looking for. Some of these devices are bigger in size whereas some runs small and have a different working pattern. If you are a novice; it will do good to have some homework done before you go ahead and make an expensive investment.

Basic Features

There are some of the basic features that you should make sure that you have it in your grinder device; and obviously when you are paying for it. The grinder comes with gear that balances the power to handle the tough work to soft working conditions. Whether you are cutting metal, stone or steel there will be the times when the disc will be jammed, these gears helps in pushing against them which takes the punch.

Working With Handle Angle Grinders

While working with these grinders, surely it is going to put a strain on the wrists especially if there is sudden rush of power when starting the device. If you are continuously working on the grinder machines, you require frequent stops to rest your forearms and wrists.

Vibration is another primary factor which makes it tough to work with these grinders as even the best grinders will not help you to completely eliminate the vibration so if you have soft grip handled grinder machine you can rest assure that your job can be comfortably handled for longer period of time.

Another thing that you should take care is ensuring that the handle angle grinder is versatile and gets your job done without any hassles. The best one will come equipped with essential working components offering good amount of protection so that you can carry on with your job with complete comfort.

 

Pricing

Obviously, not everyone has the budget for buying this tool and besides you may require for a particular job and don’t need after that hence buying could be waste of money. So, what you can do is get these angle grinders are available on rental basis. Once you finish the job you return it, as simple as it seems. Ensure that you are getting the right tool for the right job.

Our professionals at Xtreme Polishing Systems are readily available to answer any questions or assist with your inquiries, so please feel free to contact us at (877) 958-5732 or visit our website www.xtremepolishingsystems.com and shop today!

Choosing the Right Concrete Polishing Tool Manufacturer

Choosing the Right Concrete Polishing Tool Manufacturer

Concrete is used for every construction. It is the material that holds the bricks and iron bars together. Concrete is also used on the surface of the ground to make a solid floor. Concrete is one of the most ingenious inventions done by the man in the past decade. One can only wonder what human life will be like in the absence of concrete.

It is a well-known fact that the concrete rough. When it is mixed in the machine, before being spread on the floor, it is churned vigorously. This churning makes it easy to mix the concrete and the water properly. The churning action also eliminates the formation of any air bubbles in the concrete. It is necessary to remove all air bubbles as these can be later lead to hairline fractures in the concrete. If not treated in time, these hairline fractures would develop in gaping cracks. As for the surface of the concrete, it is as rough as it can be. But walking on the rough surface will not feel or look nice. This is where the concrete polishing machine comes to the forefront.

Picking the right manufacturing company

As concrete has become the center of all constructions, it is but obvious that the demand for tools, which will be able to polish the surface of the concrete will also be in demand. Engineers have spent a lot of time and then were successful in inventing a grinding and polishing machine that will be able to make the rough surface of the concrete smooth as a baby’s bottom. There are no extra points for guessing that there are many concrete polishing machine manufacturers in the market. It is advantageous as you will be able to choose from a wide range of products. On the flip side of the coin, it will also confuse the buyers about which company they should trust.

Reputation of the manufacturing company

It is always best to trust a name that has been around for many years if you want to eliminate any risks. A machine producing company will not be able to operate in the market for long id they do not provide good tools. You will be able to fool the customers once but not forever. An old concrete polishing tool manufacturing company that has been operating in the market for long must be producing good tools. Otherwise, they will not be able to make a profit. Going the tried and tested way is a wise decision. But this does not mean that the new and emerging companies are all bad.

After-sale services that you get

It must be remembered that the concrete polishing gear is, after all, a tool. It is common for the tools to breakdown or malfunction. It does not mean that the entire machine is faulty. Maybe that the power wire is not properly attached or the motor is jammed. In this case, a simple servicing will make the tool as good as new. Make sure that the manufacturing company will not shy away from providing after-sale maintenance.

Our professionals at Xtreme Polishing Systems are readily available to answer any questions or assist with your inquiries, so please feel free to contact us at (877) 958-5732 or visit our website www.xtremepolishingsystems.com and shop today!